BWSNW - DIMETHYL FORMAMIDE, DMF
- MSDS: BWSNW
- Manufacturer: BURDICK AND JACKSON DIV OF BAXTER HEALTHCARE CORP
- Product Name: DIMETHYL FORMAMIDE, DMF
- National Stock Number: 6810-00-877-4340
Product Identification
Product ID:DIMETHYL FORMAMIDE, DMF
MSDS Date:07/01/1989
FSC:6810
NIIN:00-877-4340
MSDS Number: BWSNW
Responsible Party
MUSKEGON, MI 49442-6101
US
Emergency Phone: 616-726-3171, CHEMTREC 800-424-9300
Info Phone: 616-726-3171
Cage: 2H215
Contractor
Telephone: 800-368-0050/800-707-4555
Cage: 2H215
Ingredients
DIMETHYLFORMAMIDE
CAS: 68-12-2
RTECS: LQ2100000
Fraction By Weight: 100%
OSHA PEL S, 10 PPM
ACGIH TLV: S, 10 PPM; 9394
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL:DIZZ,HEAD,NAU,ABDOMINAL
SPASMS,UPPER RESP TRACT IRRIT.LIVER/KIDNEY INJURY POSSIBLE FRM
REPEATED/PROLONGED EXPO.EYE:LIQ/HIGH VAP CONC CAN BE
IRRITATING.SKIN:PROLONGED/REPEATED CONTACT CAN CAUSE I
RRIT/DERM.READILY ABSORBED THRU SKIN W/SYSTEMIC EFFECTS SIMILAR TO
INHAL.INGEST:GI TRACT DISCOMFORT.DEATH IF INGEST >50G
Explanation of Carcinogenicity:PER MSDS:DIMETHYL FORMAMIDE IS ISTED AS
A SUSPECTED HUMAN CARCINOGEN BY IARC.PROD DOES NOT CONTAIN CARCI
>0.1 CONC.
Effects of Overexposure:EYE & MUCOUS MEMBRANE IRRITANT, PRIMARY SKIN
IRRITANT & HEPATOTOXIN. ACUTE EXPO CAUSES DIZZINESS, NAUSEA,
VOMITING, & SEVERE ABDOMINAL SPASMS. CHRONIC INHAL CAN CAUSE LIVER
& KIDNEY DAMAGE.
Medical Cond Aggravated by Exposure:PRECLUDE FRM EXPO THOSE INDIVIDUALS
W/DISEASE OF LIVER & KIDNEY & THOSE SUSCEPTIBLE TO DERM.
SIMULTANEOUS EXPO TO PROD AND ALCOHOL CAUSES GACIAL FLUSHING &
PALPITATION.
First Aid
First Aid:INHAL:IMMED REMOVE TO FRESHA IR.NOT BREATH GIVE
MOUTH-TO-MOUTH RESCUE BREATH.NO PULSE GIVE CPR.CONTACT PHYSICIAN
IMMED. EYE:RINSE W/COPIOUS AMTS OF WATER @LEAST 15MINS.GET EMERG
MED ASSIST.SKIN:FLUSH WELL @LEAST 15MINS.WASH AREA
W/SOAP/WATER.REMOVE CONTAMIN CLOTH/SHOES.GET EMERG MED
ASSIST.INGEST:CALL POI CNTRL CNTR FOR ASSIST.CONTACT PHYSICIAN
IMMED.NEVER INDUCE VOMIT/GIVE ANYTHING BY MOUTH (SUP)
Fire Fighting
Flash Point Method:TCC
Flash Point:136F,58C
Autoignition Temp:Autoignition Temp Text:445C
Lower Limits:2.2
Upper Limits:15.2
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL OR ALCOHOL FOAM.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTH & SELF-CONTAINED
BREATHING APPARATUS.HEAT WILL BUILD PRESSURE-MAY RUPTURE CLSD
STORAGE CNTNRS.KEEP FIRE-EXPO CNTNRS COOL W/WATERSPRAY
Unusual Fire/Explosion Hazard:NONE OTHER THAN COMBUSTIBILITY.
Accidental Release
Spill Release Procedures:PROTECT FROM IGNITION.WEAR PROT CLOTH/USE
APPROVED RESP EQPMT.ABSORB IN ABSORBENT RECOMMENDED FOR SOLVENT
SPILLS.REMOVE TO SAFE LOCATION FOR DISPOSAL BY APPROVED METHODS.IF
RELEASED TO ENVIRO COMLY W/ ALL REGULATORY NOTIFICATION REQMTS.
Handling
Handling and Storage Precautions:PROTECT FROM TEMP EXTREMES/DIRECT
SUNLIGHT.PROPER STORAGE MUST BE DETERMINED BASED ON OTHER MATLS
STORED & THEIR HAZ/POT CHEM INCOMPATIBLITY.
Other Precautions:IN GENERAL DIMETHYL FORMAMIDE SHOULD BE STORED IN
ACCEPTABLY PROTECTED/SECURE TOXIC STORAGE ROOM.
Exposure Controls
Respiratory Protection:USE APPROVED RESPIRATOR EQPMT. FOLLOW NIOSH &
EQPMT MFG'S RECOMMENDATIONS TO DETERMINE APPROPRIATE EQPMT
(AIR-PURIFYING, AIR-SUPPLIED, OR SELF-CONTAINED BREATHING
APPARATUS).
Ventilation:ADEQUATE VENTI REQURIED TO PROT PERSONNEL FRM EXPO TO CHEM
VAP EXCEEDING PEL/MIN FIRE HAZ.CHOICE OF VENTI EQPMT (SUPPLE)
Protective Gloves:BURYL RUB,NAT RUB,NEOPRENE
Eye Protection:SAF GLASSES,GOGGLES,FACEHSIELD
Other Protective Equipment:ACCEPTABLE CHEM RESIST PROT CLOTH
RECOMMENDED.PEOPLE ACUTELY/SPEC SENSITIVE TO PROD REQUIRE ADDN
PROT.EYEWASH,SAF SHOWER
Work Hygienic Practices:WASH CONTAMIN CLOTHING BEFORE REUSE.
Supplemental Safety and Health
1STAID:UNCONSC/HAVING CONVULSIONS. VENTI:LOC/GEN,DEPEND ON CONDITIONS
OF USE/QUANT OF MATL/OTHER OPERATING PARAMETERS.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:307F,153C
Melt/Freeze Pt:M.P/F.P Text:-77F,-60C
Vapor Pres:2.7 @20C
Vapor Density:2.5
Spec Gravity:0.949 @20C
Evaporation Rate & Reference:0.2 (N-BUTYL ACETATE=1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR, COLORLESS LIQUID WITH A SLIGHT AMINE-LIKE
ODOR.
Percent Volatiles by Volume:100
Stability
STRONG OXIDIZERS, HALOGENATED CMPDS & IRON, ALKYL ALUMINUMS, & CARBON
TETRACHLORIDE.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, OPEN CONTAINERS,
& POOR VENTILATION.
Hazardous Decomposition Products:INCOMPLETE COMBUST CAN GENERATE
CO,DIMETHYLAMINE,NITROGEN OXIDES, & OTHER TOXIC VAP.THERM DECOMP
MAY OCCUR @TEMP >350C.
Disposal
Waste Disposal Methods:DISPOSE OF DIMETHYL FORMAMIDE AS EPA HAZ WASTE.
CONTACT STATE ENVIRO AGENCY FOR LISTING OF LICENSED HAZ WASTE
DISPOSAL FACILITIES AND APPLICABLE REGS. HAZ WASTE NO:D001
(IGNITABLE). PROD NOT SUB TO RE PORTING RQMTS OF SEC 313 OF TIT III
SARA/40CFR372.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.